Product > Configure and Price

Home > Product > Configure and Price > Select Options

1-Base
CF - Center Flange - ($945)
FF - Front Flange - ($900)
AF - "A" Flange - ($1160)

2-Output Shaft
5 - Flanged Shaft with 5) 1/2" Studs - (add $165)
1 - 2.250" Straight Keyed Shaft - (n/c)
2 - Flanged Shaft with (4) 1/2" Studs - (add $165)
22 - Flanged Shaft with (4) 5/8" Studs - (add $165)
3 - 2.250" J501 Tapered Shaft - (add $220)
4 - 16 Tooth 8/16 Spline Shaft - (add $135)
52 - Flanged Shaft with (5) 5/8" Studs - (add $165)
6 - 2.000" Straight Keyed Shaft - (add $80)
7 - 2-9/16" Round Shaft w/ Cross Drilled Hole - (add $220)
8 - 2.000" Hex w/ Cross Drilled Hole Shaft - (add $185)
81 - 1.625" Square Shaft - (add $185)
92 - Flanged Shaft with (10) 5/8" Studs - (add $165)

3-Motor Adapter
N - Idler Only - No Motor Input - (n/c)

4-Ratio
1 - 1:1 - (n/c)

5-Special Options
- - None - (n/c)
V - Viton Seals - (n/c)
A22 - Nickel Plated Shaft and Seal Carrier - (add $140)

** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear. Customer needs to check shaft length for acceptance by the input Sun Gear. Some adjustment can be made by adjusting the thrust plug

Custom Search