Search

| Products | Distributor-Locator | Contact | About Heco | Applications | Help | Distributor-Extranet | Feedback |

Home > Product > Configure and Price > Select Options

1-Base
16FF - Model 16 Front Flange Mount - ($1310)
16CF - Model 16 Center Flange Mount - ($1350)
16AF - Model 16 A Flange Mount - ($1640)

2-Output Shaft
1- - 2.250" Straight Keyed Shaft - (n/c)
91- - Flanged Shaft with (9) 5/8" UNF Studs - (add $155)
92- - Flanged Shaft with (10) 5/8" UNF Studs - (add $155)
81- - 1.625" Square Shaft - (add $165)
6- - 2.000" Straight Keyed Shaft - (add $50)
8- - 2.000" Hex w/ Cross Drilled Hole Shaft - (add $165)
3- - 2.250" J501 Tapered Shaft - (add $180)
7- - 2.545" 2-9/16" Round w/ Cross Drilled Hole Shaft - (add $165)
2- - Flanged Shaft with (4) 1/2-20 UNF Studs & 4 1/2-20 UNF Threaded Holes - (add $150)
22- - Flanged Shaft with (4) 5/8" Studs & 4 1/2-20 UNF Threaded Holes - (add $150)
23- - 4 1/2-20 UNF Threaded Holes & 4 .602 Thru-Holes - (add $150)
5- - Flanged Shaft with (5) 1/2" Studs - (add $150)
52- - Flanged Shaft with (5) 5/8" Studs - (add $150)
4- - 16 Tooth 8/16 Spline Shaft (spline billet available) - (add $135)
42- - 1-3/8 6 Spline Female PTO Shaft - (add $50)

3-Motor Adapter
0 - SAE B 4.00" Pilot 4 Bolt - (n/c)
4 - SAE A 3.25" Pilot 2&4 Bolt - (n/c)
5 - SAE B 4.00" Pilot 2 Bolt - (n/c)
6 - SAE C 5.00" Pilot 2&4 Bolt - (add $100)

4-Ratio
5- - 5.2:1 - (n/c)

5-Special Options
- - (none) - (n/c)
V - Viton Seals - (add $100)
A22 - Nickel Plated Shaft and Seal Carrier - (add $110)
A60 - Nickel Plated Shaft w/16Q Seal Carrier - (add $115)

6-Sun Gears
- - (none) - (n/c)
16E - Charlynn 2000 Bearingless - (add $165)
16F - Charlynn 4000 Bearingless - (add $185)
16M - 1" SAE 6B Spline Short Shaft (1.70" to 1.94" shaft length) (H,S T series) - (add $135)
16ML - 1" SAE 6B Spline (1.95" to 2.30" shaft length) (2000) - (add $135)
16D - 1" Straight Keyed (1.80" to 2.10" shaft length) - (add $125)
16H - 1-1/4" Straight Keyed (2.05" to 2.40" shaft length) - (add $135)
16B - 7/8" 13T Spline 16/32 DP (1.40" to 1.75" shaft length) - (add $170)
16C - 1" 15T Spline 16/32 DP (1.70" to 1.95" shaft length) - (add $170)
16I - 1-1/4" 14T Spline 12/24 DP (2.00" to 2.32" shaft length) - (add $135)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2018 HECO Gear. All rights reserved. 916.372.5411 |  Terms and Conditions  Warranty | Sitemap
| powered by IndustrialDNA | WebSupergoo software
w
e use the ABCpdf ASP PDF component for HTML to PDF conversion...

Custom Search