Search

| Products | Distributor-Locator | Contact | About Heco | Applications | Help | Distributor-Extranet | Feedback |

Home > Product > Configure and Price > Select Options

1-Base
16TFF - Model 16 Triple Front Flange Mount - ($2800)
16TCF - Model 16 Triple Center Flange Mount - ($2830)
16TAF - Model 16 Triple A Flange Mount - ($2895)

2-Output Shaft
1- - 2.250" Straight Keyed Shaft - (n/c)
6- - 2.000" Straight Keyed Shaft - (add $50)
4- - 16 Tooth 8/16 Spline Shaft (spline billet available) - (add $135)
2- - Flanged Shaft with (4) 1/2-20 UNF Studs & 4 1/2-20 UNF Threaded Holes - (add $150)
22- - Flanged Shaft with (4) 5/8" Studs & 4 1/2-20 UNF Threaded Holes - (add $150)
5- - Flanged Shaft with (5) 1/2" Studs - (add $150)
52- - Flanged Shaft with (5) 5/8" Studs - (add $150)
91- - Flanged Shaft with (9) 5/8" UNF Studs - (add $155)
92- - Flanged Shaft with (10) 5/8" UNF Studs - (add $155)
7- - 2.545" 2-9/16" Round w/ Cross Drilled Hole Shaft - (add $165)
8- - 2.000" Hex w/ Cross Drilled Hole Shaft - (add $165)
81- - 1.625" Square Shaft - (add $165)
3- - 2.250" J501 Tapered Shaft - (add $180)
23- - 4 1/2-20 UNF Threaded Holes & 4 .602 Thru-Holes - (add $150)

3-Motor Adapter
0 - SAE B 4.00" Pilot 4 Bolt - (n/c)
4 - SAE A 3.25" Pilot 2&4 Bolt - (n/c)
5 - SAE B 4.00" Pilot 2 Bolt - (n/c)
6 - SAE C 5.00" Pilot 2&4 Bolt - (add $100)

4-Ratio
140- - 140.6:1 - (n/c)

5-Special Options
- - (none) - (n/c)
V - Viton Seals - (add $100)
A22 - Nickel Plated Shaft and Seal Carrier - (add $110)
A60 - Nickel Plated Shaft w/16Q Seal Carrier - (add $115)
A38 - NPN Proximity Speed Pick-up w/5 meter Cable - (add $520)
A37 - PNP Proximity Speed Pick-up w/5 meter Cable - (add $520)

6-Sun Gears
- - (none) - (n/c)
16E - Charlynn 2000 Bearingless - (add $165)
16F - Charlynn 4000 Bearingless - (add $185)
16M - 1" SAE 6B Spline Short Shaft (1.70" to 1.94" shaft length) (H,S T series) - (add $135)
16ML - 1" SAE 6B Spline (1.95" to 2.30" shaft length) (2000) - (add $135)
16D - 1" Straight Keyed (1.80" to 2.10" shaft length) - (add $125)
16H - 1-1/4" Straight Keyed (2.05" to 2.40" shaft length) - (add $135)
16B - 7/8" 13T Spline 16/32 DP (1.40" to 1.75" shaft length) - (add $170)
16C - 1" 15T Spline 16/32 DP (1.70" to 1.95" shaft length) - (add $170)
16I - 1-1/4" 14T Spline 12/24 DP (2.00" to 2.32" shaft length) - (add $135)
16L - 1-1/2" - 17T Spline 12/24 DP (VIS) (*** contact Heco ***) - (call for price)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2018 HECO Gear. All rights reserved. 916.372.5411 | | Sitemap 
  | powered by IndustrialDNA | We recommend WebSupergoo software We use the ABCpdf ASP PDF component for HTML to PDF conversion... | We also use the ABCDrawHTML ASP component for HTML to jpeg conversion... |

Custom Search