Search

| Products | Distributor-Locator | Contact | About Heco | Applications | Help | Distributor-Extranet | Feedback |

Home > Product > Configure and Price > Select Options

1-Base
CF - Center Flange - ($3950)
AF - "A" Flange - ($4000)
FF - Front Flange - ($4590)

2-Output Shaft
1 - 2.750" Straight Keyed Shaft - (n/c)
11 - 3.375" Straight Keyed Shaft - (n/c)
2 - Flanged Shaft with (8) 5/8" Holes - (add $300)
22 - Flanged Shaft with (8) 5/8" Studs - (add $300)
7 - Flanged Shaft with (8) 3/4" UNC Threaded Holes - (add $300)
8 - Flanged Shaft with (10) 5/8" UNF Studs - (add $300)
4 - 23 Tooth 8/16 Spline Shaft - (add $50)

3-Motor Adapter
6 - SAE C 5.00" Pilot 2&4 Bolt - (n/c)
3 - SAE B 4.00" Pilot 2&4 Bolt - (n/c)
4 - SAE A 3.25" Pilot 2&4 Bolt - (n/c)
P - MS02 Poclain Hydrobase - (call for price)

4-Ratio
4 - 4.8:1 - (n/c)

5-Special Options
- - None - (n/c)
V - Viton Seals - (add $150)
A22 - Nickel Plated Shaft & Seal Carrier - (add $175)

6-Sun Gears
- - None - (n/c)
25F4 - 4.8:1 Ratio Charlynn 4000 Bearingless - (add $430)
25F6 - 6.0:1 Ratio Charlynn 4000 Bearingless - (add $430)
25G4 - 4.8:1 Ratio Charlynn 6000 Bearingless - (add $430)
25G6 - 6.0:1 Ratio Charlynn 6000 Bearingless - (add $430)
25I4 - 4.8:1 Ratio 1-1/4" - 14T Spline 12/24 DP - (add $290)
25I6 - 6.0:1 Ratio 1-1/4" - 14T Spline 12/24 DP - (add $290)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2024 HECO Gear. All rights reserved. 916.372.5411 |  Terms and Conditions  Warranty | Sitemap
| powered by IndustrialDNA | WebSupergoo software
w
e use the ABCpdf ASP PDF component for HTML to PDF conversion...

Custom Search