Search

| Products | Distributor-Locator | Contact | About Heco | Applications | News | Help | Distributor-Extranet |

Home > Product > Configure and Price > Select Options

1-Base
25DCF - Model 25 Double Reduction Center Flange Mount - ($2980)
25DAF - Model 25 Double Reduction A Flange Mount - ($3000)
25DFF - Model 25 Double Reduction Front Flange Mount - ($3470)

2-Output Shaft
1- - 2.750" Straight Keyed Shaft - (n/c)
11- - 3.375" Straight Keyed Shaft - (n/c)
2- - 8 Hole Flanged Shaft - (add $425)
22- - 8 Hole Flanged Shaft with 5/8" Studs - (add $500)
7- - 8 Hole Flanged Shaft with Threaded Holes - (add $515)
4- - 23 Tooth 8/16 Spline Shaft - (add $110)

3-Motor Adapter
4 - SAE A 3.25" Pilot 2&4 Bolt - (n/c)
0 - SAE B 4.00" Pilot 4 Bolt - (n/c)
5 - SAE B 4.00" Pilot 2 Bolt - (n/c)
6 - SAE C 5.00" Pilot 2&4 Bolt - (add $100)

4-Ratio
25- - 24.9 : 1 Double Reduction - (n/c)

5-Special Options
- - (none) - (n/c)
V - Viton Seals - (add $180)
A22 - Nickel Plated Shaft & Seal Carrier - (add $170)
A37 - PNP Proximity Speed Pick-up w/5 meter Cable - (add $435)
A38 - NPN Proximity Speed Pick-up w/5 meter Cable - (add $435)

6-Sun Gears
- - (none) - (n/c)
16E - Charlynn 2000 Bearingless - (add $150)
16F - Charlynn 4000 Bearingless - (add $166)
16S - Danfoss OMSS - (add $200)
16O - 7/8" Keyed (1.80" to 2.09" shaft length) - (add $150)
16D - 1" Straight Keyed (1.80" to 2.10" shaft length) - (add $115)
16M - 1" SAE 6B Spline (1.95" to 2.30" shaft length) - (add $125)
16P - 1-1/8" Keyed (1.85" to 2.15" shaft length) - (add $130)
16-4000-H - 1-1/4" Straight Keyed for Charlynn Standard 4000 Motor - (call for price)
16H - 1-1/4" Straight Keyed (2.05" to 2.40" shaft length) - (add $125)
16B - 7/8" 13T Spline 16/32 DP (1.40" to 1.75" shaft length) - (add $115)
16-4000-I - 1-1/4" 14T Spline 12/24 DP for Charlynn Standard 4000 Motor - (call for price)
16I - 1-1/4" 14T Spline 12/24 DP (2.00" to 2.32" shaft length) - (add $125)
16C - 1" 15T Spline 16/32 DP (1.70" to 1.95" shaft length) - (add $140)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2010 HECO Gear. All rights reserved. 916.372.5411 | | Sitemap 
  | powered by IndustrialDNA | We recommend WebSupergoo software We use the ABCpdf ASP PDF component for HTML to PDF conversion... | We also use the ABCDrawHTML ASP component for HTML to jpeg conversion... |

Custom Search