Search

| Products | Distributor-Locator | Contact | About Heco | Applications | Help | Distributor-Extranet | Feedback |

Home > Product > Configure and Price > Select Options

1-Base
CF - Center Flange - ($6300)
AF - "A" Flange - ($6350)
FF - Front Flange - ($6940)

2-Output Shaft
1 - 2.750" Straight Keyed Shaft - (n/c)
11 - 3.375" Straight Keyed Shaft - (n/c)
4 - 23 Tooth 8/16 Spline Shaft - (add $50)
2 - Flanged Shaft with (8) 5/8" Holes - (add $250)
22 - Flanged Shaft with (8) 5/8" Studs - (add $250)
7 - Flanged Shaft with (8) 3/4" UNC Threaded Holes - (add $250)
8 - Flanged Shaft with (10) 5/8" UNF Studs - (add $250)

3-Motor Adapter
4 - SAE A 3.25" Pilot 2&4 Bolt - (n/c)
0 - SAE B 4.00" Pilot 4 Bolt - (n/c)
5 - SAE B 4.00" Pilot 2 Bolt - (n/c)
6 - SAE C 5.00" Pilot 2&4 Bolt - (add $100)

4-Ratio

5-Special Options
- - None - (n/c)
A17 - Posi-Lock Bearing Nut - (add $200)
V - Viton Seals - (add $190)
A22 - Nickel Plated Shaft & Seal Carrier - (add $180)

6-Sun Gears
- - None - (n/c)
16E5 - Charlynn 2000 Bearingless - (add $175)
16F5 - Charlynn 4000 Bearingless - (add $240)
16M5 - 1" SAE 6B Spline Short Shaft (1.70" to 1.94" shaft length) (H,S T series) - (add $160)
16ML5 - 1" SAE 6B Spline (1.95" to 2.30" shaft length) (2000) - (add $160)
16D5 - 1" Straight Keyed (1.80" to 2.10" shaft length) - (add $138)
16H5 - 1-1/4" Straight Keyed (2.05" to 2.40" shaft length) - (add $200)
16B4 - (for 19:1) 7/8" 13T Spline 16/32 DP (1.40" to 1.75" shaft length) - (add $220)
16B5 - 7/8" 13T Spline 16/32 DP (1.40" to 1.75" shaft length) - (add $220)
16C5 - 1" 15T Spline 16/32 DP (1.70" to 1.95" shaft length) - (add $220)
16I4 - (for 19:1) 1-1/4" 14T Spline 12/24 DP (2.23" to 2.38" shaft length) - (add $160)
16I5 - 1-1/4" 14T Spline 12/24 DP (2.23" to 2.38" shaft length) - (add $160)
16L5 - 1-1/2" - 17T Spline 12/24 DP (VIS) (*** contact Heco ***) - (add $280)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2024 HECO Gear. All rights reserved. 916.372.5411 |  Terms and Conditions  Warranty | Sitemap
| powered by IndustrialDNA | WebSupergoo software
w
e use the ABCpdf ASP PDF component for HTML to PDF conversion...

Custom Search