Search

| Products | Distributor-Locator | Contact | About Heco | Applications | Help | Distributor-Extranet | Feedback |

Home > Product > Configure and Price > Select Options

1-Base
CF - Center Flange - ($12000)

2-Output Shaft
1 - 3.875" Straight Keyed Shaft - (n/c)
4 - 20 Tooth 6/12 Spline Shaft - (n/c)
2 - Flanged Shaft with (12) 3/4" Holes on 8.0" BC - (n/c)
7 - Flanged Shaft with (12) 3/4"-10 UNC Holes on 8.0" BC - (n/c)

3-Motor Adapter
6 - SAE C 5.00" Pilot 4 Bolt - (n/c)
7 - SAE D 6.00" Pilot 4 Bolt - (n/c)

4-Ratio
6-B - 6.0:1 w/Bearingless Motor Seals – (max case pressure 50psi) - (n/c)
6-S - 6.0:1 w/Standard Shaft Seals (case pressure less than 5psi) - (n/c)

5-Special Options
- - None - (n/c)
V - Viton Seals - (add $225)
A22 - Nickel Plated Shaft and Seal Carrier - (add $195)

6-Sun Gears
- - None - (n/c)
60P - MS05 Poclain Hydrobase - (call for price)
60P - MS05 Poclain Hydrobase - (call for price)
60N - 1-3/4" 27T Spline 16/32 DP - (add $600)
60J - Charlynn 10000 Bearingless - (add $510)
60V - Charlynn HP30 Bearingless - (add $750)
60L1 - 1-1/2" 17T Spline 12/24 DP (4000) (2.56" to 2.96" shaft length) - (add $600)
60L2 - 1-1/2" 17T Spline 12/24 DP (6000) (2.97" to 3.22" shaft length) - (add $600)
60L3 - 1-1/2" 17T Spline 12/24 DP (HP-30) (3.23" to 3.48" shaft length) - (add $600)
60K - 1-3/4" 13T Spline 8/16 DP - (add $480)
60N - 1-3/4" 27T Spline 16/32 DP (2.72" to 2.97" shaft length) - (add $600)
60R - 2-1/8" 16T Spline 8/16 DP (3.01" to 3.70" shaft length) - (add $900)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2024 HECO Gear. All rights reserved. 916.372.5411 |  Terms and Conditions  Warranty | Sitemap
| powered by IndustrialDNA | WebSupergoo software
w
e use the ABCpdf ASP PDF component for HTML to PDF conversion...

Custom Search