Search

| Products | Distributor-Locator | Contact | About Heco | Applications | Help | Distributor-Extranet | Feedback |

Home > Product > Configure and Price > Select Options

1-Base
CF - Center Flange - ($13700)

2-Output Shaft
1 - 3.875" Straight Keyed Shaft - (n/c)
2 - Flanged Shaft with (12) 3/4" Holes on 8.0" BC - (n/c)
7 - Flanged Shaft with (12) 3/4"-10 UNC Holes on 8.0" BC - (n/c)
4 - 20 Tooth 6/12 Spline Shaft - (n/c)

3-Motor Adapter
6 - SAE C 5.00" Pilot 2&4 Bolt - (n/c)
P - MS02 Poclain Hydrobase - (call for price)
4 - SAE A 3.25" Pilot 2&4 Bolt - (n/c)
3 - SAE B 4.00" Pilot 2&4 Bolt - (n/c)

4-Ratio
36-B - 36.0:1 w/Bearingless Motor Seals – (max case pressure 50psi) - (n/c)
36-S - 36.0:1 w/Standard Shaft Seals (case pressure less than 5psi) - (n/c)

5-Special Options
- - None - (n/c)
V - Viton Seals - (add $237)
A22 - Nickel Plated Shaft and Seal Carrier - (add $195)

6-Sun Gears
25L2-6 - 6.0:1 Ratio 1-1/2" - 17T Spline 12/24 DP (4000) - (add $450)
25F4 - 4.8:1 Ratio Charlynn 4000 Bearingless - (add $400)
25F6 - 6.0:1 Ratio Charlynn 4000 Bearingless - (add $400)
25G4 - 4.8:1 Ratio Charlynn 6000 Bearingless - (add $400)
25G6 - 6.0:1 Ratio Charlynn 6000 Bearingless - (add $400)
- - None - (n/c)
25K4 - 4.8:1 Ratio 1-3/4" - 13T Spline 8/164 DP - (add $350)
25K6 - 6.0:1 Ratio 1-3/4" - 13T Spline 8/164 DP - (add $350)
25L1-4 - 4.8:1 Ratio 1-1/2" - 17T Spline 12/24 DP (4000-compact) - (add $450)
25L1-6 - 6.0:1 Ratio 1-1/2" - 17T Spline 12/24 DP (4000-compact) - (add $450)
25L2-4 - 4.8:1 Ratio 1-1/2" - 17T Spline 12/24 DP (4000) - (add $450)
25L3-4 - 4.8:1 Ratio 1-1/2" - 17T Spline 12/24 DP (6000,VIS-30,VIS-40) - (add $450)
25L3-6 - 6.0:1 Ratio 1-1/2" - 17T Spline 12/24 DP (6000,VIS-30,VIS-40) - (add $450)
25I4 - 4.8:1 Ratio 1-1/4" - 14T Spline 12/24 DP - (add $260)
25I6 - 6.0:1 Ratio 1-1/4" - 14T Spline 12/24 DP - (add $260)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2024 HECO Gear. All rights reserved. 916.372.5411 |  Terms and Conditions  Warranty | Sitemap
| powered by IndustrialDNA | WebSupergoo software
w
e use the ABCpdf ASP PDF component for HTML to PDF conversion...

Custom Search