Search

| Products | Distributor-Locator | Contact | About Heco | Applications | Help | Distributor-Extranet | Feedback |

Home > Product > Configure and Price > Select Options

1-Base
63DCF - Model 63 Double Reduction Center Flange Mount - ($9200)

2-Output Shaft
1- - 3.875" Straight Keyed Shaft - (n/c)
2- - Flanged Shaft with (12) 3/4" Holes on 8.0" BC - (add $300)
7- - Flanged Shaft with (12) 3/4"-10 UNC Holes on 8.0" BC - (add $300)
4- - 20 Tooth 6/12 Spline Shaft (spline billet available) - (add $100)

3-Motor Adapter
6 - SAE C 5.00" Pilot 2&4 Bolt - (n/c)
4 - SAE A 3.25" Pilot 2&4 Bolt - (add $75)
3 - SAE B 4.00" Pilot 2&4 Bolt - (add $120)
7 - SAE D 6.00" Pilot 2&4 Bolt - (add $650)

4-Ratio
36-S - 36.0:1 w/Standard Shaft Seals (case pressure less than 5psi) - (n/c)
36-B - 36.0:1 w/Bearingless Motor Seals (max case pressure 50psi) - (n/c)

5-Special Options
- - (none) - (n/c)
V - Viton Seals - (add $237)
A22 - Nickel Plated Shaft and Seal Carrier - (add $200)

6-Sun Gears
25L2-6 - 6.0:1 Ratio 1-1/2" - 17T Spline 12/24 DP (4000) - (add $290)
25F6 - 6.0:1 Ratio Charlynn 4000 Bearingless - (add $230)
25G6 - 6.0:1 Ratio Charlynn 6000 Bearingless - (add $230)
- - (none) - (n/c)
25L1-6 - 6.0:1 Ratio 1-1/2" - 17T Spline 12/24 DP (4000-compact) - (add $290)
25L3-6 - 6.0:1 Ratio 1-1/2" - 17T Spline 12/24 DP (6000,VIS-30,VIS-40) - (add $290)
25K6 - 6.0:1 Ratio 1-3/4" - 13T Spline 8/164 DP - (add $350)
25I6 - 6.0:1 Ratio 1-1/4" - 14T Spline 12/24 DP - (add $200)



** Shaft lengths are the acceptable hydraulic motor shaft lengths for input to the Heco Sun Gear.  Customer needs to check shaft length for acceptance by the input Sun Gear.  Some adjustment can be made by adjusting the thrust plug

© 2018 HECO Gear. All rights reserved. 916.372.5411 |  Terms and Conditions  Warranty | Sitemap
| powered by IndustrialDNA | WebSupergoo software
w
e use the ABCpdf ASP PDF component for HTML to PDF conversion...

Custom Search